Rotork 1750 Series Pilot Solenoid Operated Poppet Valves 1/4", 3/8", 1/2"
1/4", 3/8", 1/2"

- Detailed introduction
- Need a Quote?
Midland-ACS range of 3/2 pilot solenoid operated poppet valves in stainless steel 316L for use on gases.
Features and Benefits:
Specifically designed for severe environments
Ambient temperature range -20 ºC to +180 ºC (valve only - see solenoid specification chart for details)
316L stainless steel construction
Designed for actuator control
Large flow paths (up to 110 Cv)
NACE capability option available
Working Temperature Range:
1/4" to 1/2" -20 °C to +180 °C (-4 °F to +356 °F)
Low temperature option available -50 °C (-58 °F) - solenoid fitted (consult Rotork for product codes)
Working Pressure:
Up to 12 bar (174 psi) maximum inlet pressure
Minimum pilot pressure valve size dependent
Ports NPT (BSP Option Available):
1/4" to 1/2" NPT
Pilot ports 1/8" or 1/4" (valve size dependent)
Operating Media:
Gases – filtered lubricated or non-lubricated air, inert gas, sweet (natural) and sour gases - NACE
Liquids – low pressure hydraulic, mineral oil or water (please consult Rotork)
Construction Materials:
Body & trim: 316L stainless steel
Springs: 316 stainless steel
Seals: 1/4" to 1/2" fluoroelastomer
1/4", 3/8"” and 1/2" Pilot Solenoid Poppet Valves have internal feed to solenoid, therefore can only be used 3/2 Normally Closed. If Normally Open or Separate Pilot Supply is required please consult Rotork.